NEW PRODUCTS

Ultra Small VCSO
The new VS-700 from Vectron International is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter. The SAW filter is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing.

Evacuated Miniature Crystal Oscillator
Vectron also features the EX-380 which provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental conditions. The through hole unit measures only 20.8mm x 13.2mm x 7.6mm (0.82" x 0.52" x 0.30"). This EMXO series bridges the gap between current large, high precision OCXO's and smaller TCXO's.

The EX-380 Series becomes the most economical choice where there is a need for spectral purity, short and long term stability, along with small size and dramatically reduced power consumption. A surface mount version of this oscillator is available (EX-385), and Sinewave output is available in the surface mount version.

Ultra Small Temperature Controlled Crystal Oscillator
Vectron has a series of miniature (5 x7 mm), surface mount, Temperature Compensated Crystal Oscillators (TCXO's) available in frequencies from 10 MHz to 20 MHz. The units offer stability's as tight as ±1.0 ppm vs. a temperature range of -20°C to +70°C or ±1.5 ppm -40 to 85°C. Current drain <2.0 mA. The VTC1 series low-profile (<2.0 mm maximum height) TCVCXO has been designed for pick-and-place mounting and reflow soldering. Units are available on tape-and-reel at no additional charge. The reel size is 1000 pieces. and is compatible with EIA standards. The VTC1's ultra small footprint and low profile make it ideally suited to applications where space is limited or where backside assembly is required.

Featuring

Membranes
IN2TEC has developed a variety of membranes to suit many different applications from relatively simple membrane panels to complex membrane switch assemblies. Using the latest techniques in environmental sealing, switch reliability and component integration, IN2TEC provides customers with exceptional value and service.

From simple graphic assemblies to multi-layer polydome and metal dome embossed panel assemblies, IN2TEC provides one of the broadest and most cost effective product offerings in the market. Vertical integration means they have the necessary elements of design expertise, production technology and quality control on house to build a leadership position in their field.

Chokes Delevan Chokes
Delevan has many new items, among them are the small, mid and large size Surface Mount Common Mode chokes. Each features a ferrite toroid core with 2 separate windings, hi-temp DAP case, excellent coplanarity.

CM6350 Current ratings: 250mA to 5.5 Amps
CM6460 Current ratings: 330mA to 7.0 Amps
CM6560 Current ratings: 350mA to 8.5 Amps

Transformers Delevan Transformers
Another new Delevan item is the low profile PCB mount power transformer. Featuring a laminated core construction and industry standard pin configuration.

6051-6055 Dual wound 115/230 Volt Primary.

 

Miniature Trackball
C&K Components - the leader in switch solutions is introducing the industries first Miniature Trackball with 360° scanning and select switch. This switch was developed to replace navigation keys and mini joysticks used in mobile phones, PDAs, cameras, camcorders, remote controls, and GPS systems.

Single Position Flexible Lightpipe
Chicago Miniature Lamp is pleased to announce the Flexpipe™, a “new” one piece flexible light pipe for panel mount applications. Our new design lends itself to many difficult applications where the board layout will not always allow for the ideal placement of all components.

With our new Flexpipe™ and it’s ability to be offered in any length from 100mm to 1800mm (in “mm” increments ) you can now have that valued panel light source and not have to sacrifice any board edge real estate. The 75112FPR Flexpipe™ is intended for post re-flow insertion into the PCB.
Power Cords
Volex Powercord's commitment to the worldwide market is reflected in our strategically located manufacturing facilities in the United States, Canada, Mexico, Brazil, Europe and Asia, all of which are ISO 9000 certified. We have developed a worldwide reputation for the highest quality, reliability and service.

What sets us apart from the competition:

Due to the uniqueness of each project, please contact RF Kimball for technical assistance or call 1-800-246-CORD.

Reed Switches
From Hermetic Switch we bring you Reed Switches, which are magnetically operated components with contacts hermetically sealed in a glass capsule. Positioning a permanent magnet next to the switch or placing the switch in or near an electromagnet causes the contact "reeds" to flex and touch completing a circuit. Protective inert gas or a vacuum within the capsule keeps the contacts clean and protected for the life of the device.

These very small, inexpensive devices provide millions of switching cycles in normal circuits. Applications include alarms, relays, and proximity sensors. Anytime an electric current must be turned ON or OFF without mechanically touching the switch, the REED SWITCH is a superior choice.

Proximity Sensors
 Also from Hermetic Switch, Proximity Sensors which feature Reed Switches assembled in housings to protect the switch and provide easy mounting. By selecting a Proximity Sensor, the customer is able to by-pass switch preparation, wire cutting, wire stripping, soldering and potting.

Proximity Sensors report the relative position of specific machine elements that must be continuously monitored. Changing Actuator positions cause sensor contacts to open or close allowing signal currents to flow. Proximity Sensors respond to the magnetic field of the Actuator.

If you have any comments, suggestions or
are experiencing problems with this
site please contact webmaster.